:: Tuotteet

AV-tuotteet

Valo, valonohjaus, efektit

Äänentoistotuotteet

Uutiset

DX8
- 32-bit DSP and 24-bit Analog/Digital Conversion
- 8 balanced XDR' Mic/Line inputs with trim
- 2 balanced Line inputs direct to mix bus
- 2 Independent Mix Buses and balanced Outputs
- 2 unbalanced Record Outputs
- 8 unbalanced Direct Channel Outputs
- Individual Level/Peak metering on each Input and Output
- 3-band sweepable Hi/Lo shelving and mid-peaking EQ on each Input
- 2-band sweepable shelving EQ on each Output
- 31-band Graphic EQ available on each Output
- 5-band Parametric EQ available on each Output
- One fully variable Compressor on each Output
- Independent Automixing function for each Output
- 10 Programmable Logic Inputs
- 2 independent RS-232 interface ports
- 48VDC Phantom Power switch per mic input
- PC Software application included

1528,00 € alv. 0%
(1864,00 € alv. 22%)

DX810
- True 8 x 10 matrix mixing
- Mute and Solo functions
- Input and output metering
- 32 Control and Mute Groups
- 24 Presets
- 10 logic Inputs and Outputs
- Wired remotes, PC and control systems
- Dual RS232 control ports
- Multi-level security and access rights
- 10 1/3-octave graphic EQs
- 10 eight-band parametric EQs
- 10 audio delay lines
- 18 Compressors
- 8 input Gates
- 10 Crossover Filters

2290,00 € alv. 0%
(2794,00 € alv. 22%)

DXRVC
- Assignable remote volume control for use with the DX8
- Real time control
- Assignable control for any gain point
- Connects with standard twisted pair cable

77,00 € alv. 0%
(93,00 € alv. 22%)

DXSW4
- Assignable remote switch control for use with the DX8
- Recalls many predefined functions; muting inputs & outputs, preset recall
- Real time control
- Connects with standard twisted pair cable

77,00 € alv. 0%
(93,00 € alv. 22%)

CXA120
- 120W RMS, Convection cooled
- 4 Ohm - 25V - 70V - 100V Outputs
- 1 Balanced Input
- Hi and Lo EQ
- Rack Mounting Kit Included
- Automatic 24V DC Backup Power Input

470,00 € alv. 0%
(573,00 € alv. 22%)

CXA240
- 240W RMS - 4 Ohm – 70V – 100V Outputs
- Thermal protection circuitry
- Fan cooled, dual speed
- Adjustable input levels
- Automatic 24V DC Backup Power Input

822,00 € alv. 0%
(1002,00 € alv. 22%)

CAM60
- 60W RMS
- 4 balanced XLR Microphone/Line Inputs
- 1 Stereo Auxiliary Inputs
- 4 Ohm – 25V – 50V – 70V – 100V Outputs
- Switched 24V Phantom
- Signal Processing Loop
- Voice priority function
- Automatic 24V DC Backup Power Input

392,00 € alv. 0%
(478,00 € alv. 22%)

CAM150
- 150W RMS, Fan Cooled
- 4 balanced XLR Microphone/Line Inputs
- 1 Stereo Auxiliary Inputs
- 4 Ohm - 25V - 50V - 70V - 100V Outputs
- Switched 24V Phantom
- Signal Processing Loop
- Voice priority function
- Automatic 24V DC Backup Power Input

457,00 € alv. 0%
(557,00 € alv. 22%)

CAZ800
- 800W @ 4 Ohms bridged
- Easily switchable mono/stereo/bridged mono operating modes
- Separate outputs for Channel A and Channel B
- Third output for mono bridged applications: also provides both output channels on a single connector
- 30Hz subsonic filter for low-frequency speaker protection
- Handles for easy transport and protection of level controls
- Defeatable clip limiter
- Front-panel signal and overload indication

400,00 € alv. 0%
(488,00 € alv. 22%)

CAZ1400
- 1400W @ 4 Ohms bridged
- Easily switchable mono/stereo/bridged mono operating modes
- Separate outputs for Channel A and Channel B
- Third output for mono bridged applications: also provides both output channels on a single connector
- 30Hz subsonic filter for low-frequency speaker protection
- Handles for easy transport and protection of level controls
- Defeatable clip limiter
- Front-panel signal and overload indication

533,00 € alv. 0%
(650,00 € alv. 22%)

CAZ2500
- 2500W @ 4 Ohms bridged
- Easily switchable mono/stereo/bridged mono operating modes
- Separate outputs for Channel A and Channel B
- Third output for mono bridged applications: also provides both output channels on a single connector
- 30Hz subsonic filter for low-frequency speaker protection
- Handles for easy transport and protection of level controls
- Defeatable clip limiter
- Front-panel signal and overload indication

667,00 € alv. 0%
(814,00 € alv. 22%)

CIS400
- Waveguide-loaded neodymium HF transducer
- 6.5-inch LF driver
- Integrated mounting system
- Built-in switchable High-Pass crossover
- 40 watt, 70/100V transformer built in
- 16-ohm setting
- Includes mounting hardware
- UL/cUL/CE Listed

166,00 € alv. 0%
(202,00 € alv. 22%)

CIS300
- Waveguide-loaded neodymium HF transducer
- 4.0-inch LF driver
- Integrated mounting system
- Built-in switchable High-Pass crossover
- 30 watt, 70/100V transformer built in
- UL/cUL/CE Listed
- 16-ohm setting
- Includes mounting hardware

129,00 € alv. 0%
(157,00 € alv. 22%)

CIS80
- Fitted with 8” (203.2 mm) 2-way speaker, with a polypropylene cone, 13-ounce magnet and 2.5” (63.5 mm) mylar tweeter
- 70V/100V operation
- Excellent low frequency response
- 20 watt transformer with multi tappings down to 1.25W.
- Built in ceiling tile cut-out marker.
- Dished grille design for acoustic integrity.
- Galvanized steel construction, finished in Brilliant white (RAL9003).
- Included firedome

103,00 € alv. 0%
(125,00 € alv. 22%)

CIS65
- Fitted with 6.5” (165 mm) 2-way speaker, with a polypropylene cone, 10-ounce magnet and 2” (50.8 mm) mylar tweeter
- 70V/100V operation
- Bi-polar crossover
- 10 watt transformer with multi taps down to 0.625W.
- Built in ceiling tile cut-out marker.
- Dished grille design for acoustic integrity.
- Galvanized steel construction, finished in Brilliant white (RAL9003).
- Included firedome

85,00 € alv. 0%
(104,00 € alv. 22%)

CIS50
- Fitted with 5.25” (133.35 mm) twin cone driver unit designed to offer wide response for music & speech. - 70V/100V operation
- 6 watt transformer with multi tappings down to 0.75W.
- Built in ceiling tile cut-out marker.
- Dished grille design for acoustic integrity.
- Galvanized steel construction, finished in Brilliant white (RAL9003).
- Included firedome

61,00 € alv. 0%
(75,00 € alv. 22%)

CIS6
- Fitted with 6.5” (165 mm) twin cone driver
- 70V/100V operation
- Offers wide response for music and speech
- 6 watt transformer with multi tappings down to 0.375W.
- Low profile grill design & simple fit system.
- UL94V0 high impact ABS.
- Finished in brilliant white (RAL9016)

46,00 € alv. 0%
(56,00 € alv. 22%)

SMS3
- 4.75” high-efficiency woofer
- 0.5" mylar dome tweeter loaded by a 110° x 100° constant directivity horn
- Built-in, multi-tap constant voltage transformer
- Built-in, LICC low inductance passive crossover
- Lightweight, UV/weather resistant, high density polystyrene, trapezoidal shaped enclosure for multiple applications and minimum visual intrusion
- Integrated mounting points for use with included mounting hardware
- Also available in white

127,00 € alv. 0%
(154,00 € alv. 22%)

SMS4
- 5” high-efficiency woofer
- CD horn loaded, .5” dome tweeter
- Built-in, multi-tap constant voltage transformer
- Built-in, LICC low inductance passive crossover with high frequency dynamic protection
- Lightweight, UV/weather resistant, high density polystyrene, trapezoidal shaped enclosure for multiple applications and minimum visual intrusion
- Integrated mounting points for use with included mounting hardware
- Also available in white

168,00 € alv. 0%
(205,00 € alv. 22%)

SMS5
- 5” high-efficiency woofer
- 105° x 105° constant directivity horn with Ferrofluid® cooled, .75” soft dome tweeter
- Built-in, LICC low inductance passive crossover with high frequency dynamic protection
- Lightweight, UV/weather resistant, high density polystyrene, trapezoidal shaped enclosure for multiple applications and minimum visual intrusion
- Integrated mounting points for use with included mounting hardware
- Also available in white

183,00 € alv. 0%
(223,00 € alv. 22%)

VR61
- 2-way, full range loudspeaker - Appropriate for under balcony/stage lip fill and high definition distributed systems
- 6 inch LF, 1 inch exit HF
- Rotatable HF horn allows beamwidth to be oriented as required
- Operating range 85 Hz to 20 kHz
- Power handling 150 watts at 8 Ohms
- 90° x 60° HF beamwidth
- Barrier strip input
- Economical single-amp operation
- Rugged birch enclosure available in a black or white painted finish
- Integrated 1/4”-20 mounting points for use with included U-bracket or optional eyebolts
- Optional transformer module available (AC-TX64) for 70 V and 100 V applications
- Dimensions 15.5 H x 9.5 W x 10.0 D in / 394 H x 241 W x 254 D mm

420,00 € alv. 0%
(512,00 € alv. 22%)

VR62
- 2-way, full range loudspeaker
- Appropriate for under balcony/stage lip fill and high definition distributed systems
- Two 6 inch LF, 1 inch exit HF
- Rotatable HF horn allows beamwidth to be oriented as required
- Operating range 80 Hz to 20 kHz
- Power handling 250 watts at 8 Ohms
- 90° x 60° HF beamwidth
- Barrier strip input
- Economical single-amp operation
- Rugged birch enclosure available in a black or white painted finish
- Integrated 1/4”-20 mounting points for use with included U-bracket or optional eyebolts
- Optional transformer module available (AC-TX64) for 70 V and 100 V applications
- Dimensions 22.3 H x 9.5 W x 10.0 D in / 565 H x 241 W x 254 D mm

515,00 € alv. 0%
(629,00 € alv. 22%)

VR21
- 2-way, full range loudspeaker - Appropriate as a main FOH system or for secondary coverage in large installations
- 12 inch LF, 1 inch exit HF
- Rotatable HF horn allows beamwidth to be oriented as required
- Operating range 70 Hz to 20 kHz
- Power handling 300 watts at 8 ohm
- 90° x 60° HF beamwidth standard; user-installed 60° x 45° horn included
- Barrier strip input
- Economical single-amp operation
- Rugged birch enclosure available in a black or white painted finish
- Integrated 3/8”-16 mounting points for use with optional eyebolts
- Optional transformer module available (AC-TX128) for 70 V and 100 V applications
- Dimensions 30.0 H x 16.1 W x 14.6 D in / 762 H x 408 W x 371 D mm

687,00 € alv. 0%
(838,00 € alv. 22%)

VR51
- 2-way, full range loudspeaker
- Appropriate as a main FOH system or for secondary coverage in large installations
- 15 inch LF, 1 inch exit HF
- Rotatable HF horn allows beamwidth to be oriented as required
- Operating range 55 Hz to 20 kHz
- Power handling 500 watts at 8 ohm
- 90° x 60° HF beamwidth standard; user-installed 60° x 45° horn included
- Barrier strip input
- Economical single-amp operation
- Rugged birch enclosure available in a black or white painted finish
- Integrated 3/8”-16 mounting points for use with optional eyebolts
- Optional transformer module available (AC-TX128) for 70 V and 100 V applications
- Dimensions 30.0 H x 19.0 W x 18.8 D in / 762 H x 482W x 476 D mm

783,00 € alv. 0%
(955,00 € alv. 22%)

VRM12
- 2-way, full range stage monitor loudspeaker
- Pole mount cup also allows use as a main PA loudspeaker
- Coaxial 12 inch LF, 1 inch HF
- Operating range 73 Hz to 20 kHz
- Power handling 300 watts at 8 Ohms
- 90° x 90° HF beamwidth
- Dual NL4 Speakon inputs
- Economical single-amp operation
- Rugged birch enclosure available in a black or white painted finish
- Dimensions 15.0 H x 15.0 W x 12.5 D in / 381 H x 381 W x 318 D mm

707,00 € alv. 0%
(862,00 € alv. 22%)

VRS18
- 18 inch subwoofer
- Appropriate for applications where maximum LF extension is required
- Operating range 31 Hz to 145 Hz
- Power handling 500 watts at 8 ohm
- Barrier strip input
- Rugged birch enclosure available in a black or white painted finish
- Integrated 3/8”-16 mounting points for use with optional eyebolts or array brackets
- Dimensions 30.0 H x 24.6 W x 19.6 D in / 762 H x 624 W x 498 D mm

859,00 € alv. 0%
(1047,00 € alv. 22%)

VRS12
- Two 12 inch subwoofer
- Appropriate for applications where subwoofers must be installed under a low stage
- Operating range 32 Hz to 150 Hz
- Power handling 500 watts at 4 ohm
- Barrier strip input
- Rugged birch enclosure available in a black or white painted finish
- Integrated 3/8”-16 mounting points for use with optional eyebolts or array brackets
- Dimensions 15.5 H x 30.0 W x 30.0 D in / 394 H x 762 W x 762 D mm

954,00 € alv. 0%
(1164,00 € alv. 22%)

CLA2
- 2 X 3” (76.2mm) woofers and 1 X 2” (50.8mm) tweeter - Rated power 20W
- Line transformer for 70V/100V systems
- Operating range 150Hz to 20kHz
- 190° x 125° HF beamwidth
- Durable galvanized steel housing
- Available in white (RAL 9003)
- Dimensions 11.97 H x 3.7 W x 3.74 D in / 304 H x 94 W x 95 D mm

109,00 € alv. 0%
(133,00 € alv. 22%)

CLA4
- 3 X 3” (76.2mm) woofers and 1 X 2” (50.8mm) tweeter - Rated power 30W
- Line transformer for 70V/100V systems
- Operating range 140Hz to 20kHz
- 195° x 105° HF beamwidth
- Durable galvanized steel housing
- Available in white (RAL 9003)
- Dimensions 15.24 H x 3.7 W x 3.74 D in / 387 H x 94 W x 95 D mm

131,00 € alv. 0%
(160,00 € alv. 22%)

CLA6
- 4 X 3” (76.2mm) woofers and 1 X 2” (50.8mm) tweeter - Rated power 40W
- Line transformer for 70V/100V systems
- Operating range 140Hz to 20kHz
- 205° x 85° HF beamwidth
- Durable galvanized steel housing
- Available in white (RAL 9003)
- Dimensions 18.46 H x 3.7 W x 3.74 D in / 469 H x 94 W x 95 D mm

192,00 € alv. 0%
(234,00 € alv. 22%)

CLA37
- 2-way, full range, line array loudspeaker - Appropriate for speech reinforcement applications with challenging acoustics
- Seven 3 inch LF
- Operating range 140 Hz to 17.5 kHz
- Power handling 150 watts at 8 ohm
- 120° x 30° HF beamwidth
- Barrier strip input
- Economical single-amp operation
- Rugged birch enclosure available in a black or white painted finish
- Integrated 1/4”-20 mounting points for use with included bracket or optional eyebolts
- Optional transformer module available (AC-TX64) for 70 V and 100 V applications
- Dimensions 25.0 H x 6.0 W x 5.5 D in / 635 H x 152 W x 140 D mm

611,00 € alv. 0%
(745,00 € alv. 22%)

PH10
- Rated power 10W(rms)
- 70.7V/100V/8Ù operation
- Impact resistant ABS construction
- Water protected to IEC529 IP66
- Very high efficiency
- Sealed, built-in line transformer with screwdriver adjustable power selector
- Glanded cable tails
- Stainless steel bracket/exterior hardware

74,00 € alv. 0%
(91,00 € alv. 22%)

PH15
- Rated power 15W(rms) - 70.7V/100V/8Ù operation
- Impact resistant ABS construction
- Water protected to IEC529 IP66
- Very high efficiency
- Sealed, built-in line transformer with screwdriver adjustable power selector
- Glanded cable tails
- Stainless steel bracket/exterior hardware

85,00 € alv. 0%
(104,00 € alv. 22%)

PH30
- Rated power 30W(rms) - 70.7V/100V/8Ù operation
- Impact resistant ABS construction
- Water protected to IEC529 IP66
- Very high efficiency
- Sealed, built-in line transformer with screwdriver adjustable power selector
- Glanded cable tails
- Stainless steel bracket/exterior hardware

98,00 € alv. 0%
(120,00 € alv. 22%)